IQxel-MW
Model IQxel-MW
Manufactory SAMBOW ADTECH
Buy now Contact us now to get better price

HOT LINE

TEL: +84 222 3895 596
MOBILE: +84 969 095 867

EMAIL

sales@viamvina.com.vn

IQxel-MW™ is a comprehensive, multi-device test solution with superior performance for the next generation of wireless connectivity devices, ideal for both R&D and high-volume production. The optimized performance ensures that you are truly measuring the device, and not measuring uncertainty in the measurement setup. This enables high test yield and minimal retest on the manufacturing floor.

As 802.11ac (Wi-Fi 5) and 802.11ax (Wi-Fi 6) technologies are adopted by device makers, product requirements are becoming more complicated, leading to complex test setups. IQxel-MW is equipped with new features that simplify production testing and lower production costs. The IQxel-MW series is available in three configurations—2 ports, 8 ports and 16 ports—which support up to 2×2, 4×4 and scalable to 8×8 true MIMO testing.

Designed for the Demanding Requirements of 802.11ax (Wi-Fi 6)

  • Class-defining residual EVM performance for 1024-QAM
  • Unrivaled RF port configurability, eliminating the need for external components in the test fixture
  • Native support for per-port 160 MHz and 80+80 MHz signal combination
  • Simultaneous dual-band test enabled (2.4 GHz and 5 GHz): ensures performance of TX/TX, TX/RX and RX/RX operating modes
  • Support for single-user OFDMA, multi-user OFDMA, Uplink and Downlink
  • Patented Packet Engine™ technology for 802.11ax MU-OFDMA power and timing control verification

Highest Test Throughput for Manufacturing

  • Industry-leading test speed and efficiency delivered by LitePoint’s patented Packet Engine™ technology
  • Parallel multi-DUT test architecture lets you independently start and stop testing for each device in the same test station
  • Re-use existing equipment, preserve your factory setup, and consolidate multiple test stations into one

Jump-Start Your Testing with Turnkey Software Solutions

  • Start testing immediately with IQfact+™ software solutions for leading WLAN and Bluetooth chipsets
  • Growing library of hundreds of chipset-specific test solutions save setup time and development costs
  • Fully backward compatible with existing LitePoint connectivity test systems

Technology Options

  • Wi-Fi, 802.11ax (Wi-Fi 6)
  • Wi-Fi, 802.11ac Wave 1 and Wave 2 (Wi-Fi 5)
  • Wi-Fi, 802.11a/b/g/j/n/p
  • Wi-Fi, 802.11af/ah
  • Bluetooth, Classic/EDR (1-4.x), Low Energy (4.0, 4.1, 4.2) and Bluetooth 5
  • Scalable to 8×8 true MIMO
  • Zigbee, Z-Wave and Wi-SUN
  • DECT
  • LTE
  • LPWAN, Sigfox / LoRa
  • Navigation: GPS, GLONASS, Compass and Galileo

When & Where to Use the IQxel-MW for Testing?

  • In lab and manufacturing environments
  • For products in the product characterization, PCB-level manufacturing or RF modules lifecycle stages
  • For high-performance 802.11ax-enabled networking, computing, mobile or gaming devices

Software

IQfact+

A family of specialized software tools designated to analyze the wireless capabilities of commonly utilized integrated wireless chipsets. Watch this IQfact+ Demo to learn more.

Learn More