ETS-Lindgren’s HI-1710A Microwave Oven Survey Meter
Catalogue
ETS-Lindgren’s HI-1710A Microwave Oven Survey Meter
ETS-Lindgren’s HI-1710A Microwave Oven Survey Meter
Introduction :
ETS-Lindgren’s HI-1710A Microwave Oven Survey Meter combines proven and reliable diode sensing technology with digital processing techniques to accurately measure microwave oven radiation. The RS232 interface allows easy adapting of the unit to computerized data acquisition in laboratory studies and semi-automatic production test systems. Digital Peak-Hold and Push Button Zeroing aid in improving testing productivity and reducing errors. Digital filters, selected from the front panel, provide the Fast or Slow responses familiar to analog survey instrument users. Built in self-test sequences test meter performance at turn-on and each time the meter is zeroed. Diagnostic functions accessed from the front panel give quick indications of meter status.
Physical Specifications
HI-1710A Control Module (H x W x D): 127 mm 311 mm x 254 mm (5.0 in x 12.25 in x 10.0 in)
Probe Cable Length: 2.74 m (9 ft)
Probe Length: 30 cm (11.81 in)
Control Inputs:
- Zero – Dry Switch Closure to Zero the HI-1710A
- RS-232 – Standard 9-pin, 2-way Communications Output
Control Outputs:
- Alarm Output – Form C Contact, 24 V, 1 Amp
- Analog Output – 4 VDC Maximum, 1 mA Maximum
Electrical Specifications
Calibration Frequency: 2450 MHz
Ranges: 0.1 to 1 mW/cm2, 0.2 to 2 mW/cm2, 0.5 to 5 mW/cm2, 1.0 to 10 mW/cm2
Overload Capacity: 2.0 W/cm2
Filter Response Time To 90% of Final Value for a Step Input:
Ranges: 0.1 to 1 mW/cm2, 0.2 to 2 mW/cm2, 0.5 to 5 mW/cm2, 1.0 to 10 mW/cm2
Overload Capacity: 2.0 W/cm2
Filter Response Time To 90% of Final Value for a Step Input:
- RAW: (Version 3.xx only) Unfiltered
- SLOW: <3 Seconds
- FAST: <1 Second
Input Power: 100/240 VAC, 60/50 Hz
