+84 222 3895 596

Com-Power LI-325C LISN 25 Amps for DO-160 & MIL-STD 461 I Introducing Com-Power LI-325C: The LI-325C Line Impedance Stabilization Network (LISN) provides the measurement platform necessary to perform emissions compliance testing performed on power lines as required by most standards worldwide for commercial products. The LI-325C complies with both RTCA DO-160 and MIL-STD 461. LISN provides stable defined impedance and isolates the EUT from power influences, thereby providing accurate and repeatable results . The LI-325C consists of a pair of single, separately placed conductor networks, installed in series with each current-carrying conductor in a single-phase, two-phase or DC electrical system. The second pair of LI-325Cs can be used to supply a 3-phase power system (Wye or Delta configuration). The LI-325C is equipped with Superior Electric SUPERCON® shielded receptacles at the power supply (power input) and EUT (power output) ports. Includes appropriate color-coded plugs for connection to the power source and EUT cord. This LISN uses an air core inductor to prevent saturation and permeability variations. The mounting plate of the LI-325C is unpainted to facilitate connection to ground during installation, which is essential due to the high leakage current. All Com-Power LISNs are individually calibrated to the relevant RTCA DO-160 and MIL-STD 461 requirements. Impedance and Insertion Loss data are supplied with each device, along with a certificate of calibration standard. II Technical specifications of Com-Power LI-325C: Product Name: Line Impedance Stabilization Network (LISN) Specification: RTCA DO-160 / MIL-STD 461D Application: Power Line conducted emission tests Frequency Range: 10KHz – 400 MHz RF Connector: 50 Ohms N-type (female) Current Rating: 25 Ampere AC, 17 Ampere DC Voltage Rating: 270 VAC (Line to Ground), 380 VDC Inductors: 5 microhenry (air-core) Mains & EUT Connections: Superior Electric SUPERCON Shrouded sockets Dimensions (each network): 13 x 7.5 x 8 inches / 33 x 19 x 20 cm Weight (each network): 5 lbs / 2.2 kg Insertion Loss: <0.3 dB (150 kHz - 30 MHz)

Danh mục: LISN
Catalogue
Request for quote

Com-Power LI-325C LISN 25 Amps for DO-160 & MIL-STD 461 I Introducing Com-Power LI-325C: The LI-325C Line Impedance Stabilization Network (LISN) provides the measurement platform necessary to perform emissions compliance testing performed on power lines as required by most standards worldwide for commercial products. The LI-325C complies with both RTCA DO-160 and MIL-STD 461. LISN provides stable defined impedance and isolates the EUT from power influences, thereby providing accurate and repeatable results . The LI-325C consists of a pair of single, separately placed conductor networks, installed in series with each current-carrying conductor in a single-phase, two-phase or DC electrical system. The second pair of LI-325Cs can be used to supply a 3-phase power system (Wye or Delta configuration). The LI-325C is equipped with Superior Electric SUPERCON® shielded receptacles at the power supply (power input) and EUT (power output) ports. Includes appropriate color-coded plugs for connection to the power source and EUT cord. This LISN uses an air core inductor to prevent saturation and permeability variations. The mounting plate of the LI-325C is unpainted to facilitate connection to ground during installation, which is essential due to the high leakage current. All Com-Power LISNs are individually calibrated to the relevant RTCA DO-160 and MIL-STD 461 requirements. Impedance and Insertion Loss data are supplied with each device, along with a certificate of calibration standard. II Technical specifications of Com-Power LI-325C: Product Name: Line Impedance Stabilization Network (LISN) Specification: RTCA DO-160 / MIL-STD 461D Application: Power Line conducted emission tests Frequency Range: 10KHz – 400 MHz RF Connector: 50 Ohms N-type (female) Current Rating: 25 Ampere AC, 17 Ampere DC Voltage Rating: 270 VAC (Line to Ground), 380 VDC Inductors: 5 microhenry (air-core) Mains & EUT Connections: Superior Electric SUPERCON Shrouded sockets Dimensions (each network): 13 x 7.5 x 8 inches / 33 x 19 x 20 cm Weight (each network): 5 lbs / 2.2 kg Insertion Loss: <0.3 dB (150 kHz - 30 MHz)

Fill out this field
유효한 이메일 주소를 입력해주세요.
Fill out this field
Fill out this field
Fill out this field

DO-160 및 MIL-STD 461용 Com-Power LI-325C LISN 25A

Com-Power LI-325C를 소개합니다:

LI-325C 라인 임피던스 안정화 네트워크(LISN)는 상업용 제품에 대해 전 세계 대부분의 표준에서 요구하는 대로 전력선에서 수행되는 방출 적합성 테스트를 수행하는 데 필요한 측정 플랫폼을 제공합니다. LI-325C는 RTCA DO-160 및 MIL-STD 461을 모두 준수합니다. LISN은 안정적으로 정의된 임피던스를 제공하고 EUT를 전력 영향으로부터 격리함으로써 정확하고 반복 가능한 결과를 제공합니다. LI-325C는 단상, 2상 또는 DC 전기 시스템의 각 전류 전달 도체와 직렬로 설치된 한 쌍의 별도로 배치된 도체 네트워크로 구성됩니다. LI-325C의 두 번째 쌍은 3상 전원 시스템(Wye 또는 Delta 구성)을 공급하는 데 사용할 수 있습니다. LI-325C에는 전원 공급 장치(전원 입력) 및 EUT(전원 출력) 포트에 Superior Electric SUPERCON® 차폐 콘센트가 장착되어 있습니다. 전원 및 EUT 코드 연결에 적합한 색상으로 구분된 플러그가 포함되어 있습니다. 이 LISN은 공심 인덕터를 사용하여 포화 및 투자율 변화를 방지합니다. LI-325C의 장착 플레이트는 높은 누설 전류로 인해 필수적인 설치 중 접지 연결을 용이하게 하기 위해 도색되지 않았습니다. 모든 Com-Power LISN은 관련 RTCA DO-160 및 MIL-STD 461 요구 사항에 따라 개별적으로 교정됩니다. 임피던스 및 삽입 손실 데이터는 교정 표준 인증서와 함께 각 장치와 함께 제공됩니다.

II Com-Power LI-325C의 기술 사양:

제품명: 라인 임피던스 안정화 네트워크(LISN)
사양: RTCA DO-160 / MIL-STD 461D
응용 분야: 전력선 전도 방출 테스트
주파수 범위: 10KHz – 400MHz
RF 커넥터: 50Ω N형(암)
전류 정격: 25암페어 AC, 17암페어 DC
전압 정격: 270VAC(라인-접지), 380VDC
인덕터: 5마이크로헨리(공심)
주전원 및 EUT 연결: 우수한 전기 SUPERCON 슈라우드 소켓
크기(각 네트워크): 13 x 7.5 x 8인치 / 33 x 19 x 20cm
무게(각 네트워크): 5lbs/2.2kg
삽입 손실: <0.3dB(150kHz – 30MHz)

관련 상품

phone
phone