Schwarzbeck Automotive Antennas
Danh mục: Chưa phân loại
Catalogue
Schwarzbeck Automotive Antennas
[contact-form-7 id="237" title="Yêu cầu báo giá"]
Schwarzbeck Automotive Antennas
420 NJ
| Required balun: | SBA 9113 or SBA 9113 Mini Version | |
| Connector: | N | |
| Frequency range: | 370 MHz … 2.7 GHz | |
| Nominal impedance: | 50 Ω | |
| Maxumum input power: | 20 W | |
| VSWR: | < 6 (0.7 GHz < f < 1.8 GHz) < 5 (1.8 GHz < f < 2.7 GHz) |
|
| Material: | Aluminium | |
| Element size: | 240 x 109 x 2 mm | |
| Weight: | 135 g | |
| recomended space: | 5 – 50 mm | |
| Option: | Spacer 50 mm | |
| Other Spacer on request |
422 NJ
| Required Balun: | SBA 9119 | |
| Connector: | N | |
| Frequency Range: | 800 MHz … 6 GHz | |
| Nominal Impedance: | 50 Ω | |
| Continuous Power: | 20 W | |
| VSWR: | < 8 (0.9 GHz < f < 2.4 GHz) < 4 (2.4 GHz < f < 6 GHz) |
|
| Material: | Aluminium | |
| Flat Element Dimensions: | 108 x 49 x 2 mm | |
| Weight: | 50 g | |
| Recommended Spacing: | 30 mm | |
| Recommended mesh width: | 30 – 50 mm | |
| Options: | Spacer 30 mm |
TSA Antennas
| Frequency Range: | 385 MHz … 2 GHz | |
| Polarisation: | linear | |
| Pattern Type: | omnidirektional | |
| Permissible Power: | 20 W | |
| Connector: | N | |
| Impedance: | 50 Ω nominal | |
| Length: | 365 – 640 mm | |
| Diameter: | 25 mm | |
| Weight: | 300 g – 500 g | |
| Mounting: | 22 mm diameter tube |
NMHA 6M
Nissan and Renault antenna set to test immunity against handy transmitters acc. to Nissan specification 28401NDS02 [6] and RENAULT 36-00-808/L (combined set) consisting of normal mode helical antennas, counterpoise, SBA 9113 with 420NJ elements and transport case (see extra list)
VW TL 82166 2009-05 7.3 Antenna Set
The antenna kit for testing immunity against hand-held radios acc. to Volkswagen standard TL 82166:2009-05
consists of the following parts:
For the frequency range 26-174 MHz matched normal mode helical antennas are used. For frequencies from 360 MHz and beyond the broadband SBA 9113 mini version with 420 NJ elements is used.
NMHB 4MM – 1:1 Balun
| Usable Frequency Range: | 9 kHz – 420 MHz | |
| Nominal Impedance: | 50 Ω | |
| Standing Wave Ratio SWR typical: | < 2 | |
| Max. Input Power: | 50 W | |
| Connector: | N-female | |
| Symmetrical Terminals: | M4 | |
| Mount: | 22 mm Tube | |
| Length: | 212 mm | |
| Width: | 75 mm | |
| Height: | 28 mm | |
| Weight: | 270 g | |
| Recommended Accessories: | FDAI 146 (142-150 MHz) FDAI 155 (151-161 MHz) FDAI 165 (162-174 MHz) FDAI 174 (172-180 MHz) FDAI 222 (215-246 MHz) FDAI Spacer 50 CCA FDAI |
FDAI 146 – Folded Dipole Antenna 146 MHz
| Usable Frequency Range: | 142 – 150 MHz | |
| Nominal Impedance: | 50 Ω | |
| Standing Wave Ratio SWR typical: | < 2 | |
| Max. Input Power: | 50 W | |
| Symmetrical Terminals: | M4 | |
| Length: | 89 mm | |
| Width: | 240 mm | |
| Height: | 140 mm | |
| Weight: | 0.9 kg | |
| Recommended Accessories: | NMHB 4MM FDAI Spacer 50 CCA FDAI |
FDAI 155 – Folded Dipole Antenna 155 MHz
| Usable Frequency Range: | 151 – 160 MHz | |
| Nominal Impedance: | 50 Ω | |
| Standing Wave Ratio SWR typical: | < 2 | |
| Max. Input Power: | 50 W | |
| Symmetrical Terminals: | M4 | |
| Length: | 89 mm | |
| Width: | 240 mm | |
| Height: | 140 mm | |
| Weight: | 0.9 kg | |
| Recommended Accessories: | NMHB 4MM FDAI Spacer 50 CCA FDAI |
FDAI 165 – Folded Dipole Antenna 165 MHz
| Usable Frequency Range: | 162 – 174 MHz | |
| Nominal Impedance: | 50 Ω | |
| Standing Wave Ratio SWR typical: | < 2 | |
| Max. Input Power: | 50 W | |
| Symmetrical Terminals: | M4 | |
| Length: | 89 mm | |
| Width: | 240 mm | |
| Height: | 140 mm | |
| Weight: | 0.9 kg | |
| Recommended Accessories: | NMHB 4MM FDAI Spacer 50 CCA FDAI |
FDAI 174 – Folded Dipole Antenna 174 MHz
| Usable Frequency Range: | 166 – 180 MHz | |
| Nominal Impedance: | 50 Ω | |
| Standing Wave Ratio SWR typical: | < 2 | |
| Max. Input Power: | 50 W | |
| Symmetrical Terminals: | M4 | |
| Length: | 89 mm | |
| Width: | 240 mm | |
| Height: | 140 mm | |
| Weight: | 0.9 kg | |
| Recommended Accessories: | NMHB 4MM FDAI Spacer 50 CCA FDAI |
FDAI 222 – Folded Dipole Antenna 222 MHz
| Usable Frequency Range: | 215 – 246 MHz | |
| Nominal Impedance: | 50 Ω | |
| Standing Wave Ratio SWR typical: | < 2 | |
| Max. Input Power: | 50 W | |
| Symmetrical Terminals: | M4 | |
| Length: | 89 mm | |
| Width: | 240 mm | |
| Height: | 140 mm | |
| Weight: | 0.9 kg | |
| Recommended Accessories: | NMHB 4MM FDAI Spacer 50 CCA FDAI |
HLC 27
| Frequency Range: | 26.96…27.4 MHz | |
| Polarisation: | linear | |
| Pattern Type: | omnidirectional | |
| Permissible Power: | 50 W | |
| Connector: | Type BNC female | |
| Impedance: | 50 Ohms nominal | |
| Length: | 80 mm | |
| Width: | 80 mm | |
| Hight: | 145 mm | |
| Weight: | 585 g | |
| Mounting: | 22 mm diameter tube, L = 30 mm
3/8″ |
HLC 146
| Frequency Range: | 144…148 MHz | |
| Polarisation: | linear | |
| Pattern Type: | omnidirectional | |
| Permissible Power: | 50 W | |
| Connector: | Type BNC female | |
| Impedance: | 50 Ohms nominal | |
| Length: | 80 mm | |
| Width: | 80 mm | |
| Hight: | 145 mm | |
| Weight: | 310 g | |
| Mounting: | 22 mm diameter tube, L = 30 mm
3/8″ |
HLC 170
| Frequency Range: | 169.8…173 MHz | |
| Polarisation: | linear | |
| Pattern Type: | omnidirectional | |
| Permissible Power: | 50 W | |
| Connector: | Type BNC female | |
| Impedance: | 50 Ohms nominal | |
| Length: | 80 mm | |
| Width: | 80 mm | |
| Hight: | 145 mm | |
| Weight: | 310 g | |
| Mounting: | 22 mm diameter tube, L = 30 mm
3/8″ |
FAN 405
| Frequency Range: | 380…430 MHz | |
| Polarisation: | linear | |
| Pattern Type: | omnidirectional | |
| Permissible Power: | 50 W | |
| Connector: | Type BNC female | |
| Impedance: | 50 Ohms nominal | |
| Length: | 80 mm | |
| Width: | 80 mm | |
| Hight: | 145 mm | |
| Weight: | 310 g | |
| Mounting: | 22 mm diameter tube, L = 30 mm
3/8″ |
FAN 450
| Frequency Range: | 430…470 MHz | |
| Polarisation: | linear | |
| Pattern Type: | omnidirectional | |
| Permissible Power: | 50 W | |
| Connector: | Type BNC female | |
| Impedance: | 50 Ohms nominal | |
| Length: | 80 mm | |
| Width: | 80 mm | |
| Hight: | 145 mm | |
| Weight: | 310 g | |
| Mounting: | 22 mm diameter tube, L = 30 mm
3/8″ |
EGG 900
| Frequency Range: | 890…915 MHz | |
| Polarisation: | linear | |
| Pattern Type: | omnidirectional | |
| Permissible Power: | 50 W | |
| Connector: | Type SMA female | |
| Impedance: | 50 Ohms nominal | |
| Length: | 80 mm | |
| Width: | 80 mm | |
| Hight: | 150 mm | |
| Weight: | 300 g | |
| Mounting: | 22 mm diameter tube, L = 30 mm
3/8″ |
EGG 1860
| Frequency Range: | 1710…2025 MHz | |
| Polarisation: | linear | |
| Pattern Type: | omnidirectional | |
| Permissible Power: | 50 W | |
| Connector: | Type SMA female | |
| Impedance: | 50 Ohms nominal | |
| Length: | 80 mm | |
| Width: | 80 mm | |
| Hight: | 85 mm | |
| Weight: | 300 g | |
| Mounting: | 22 mm diameter tube, L = 30 mm
3/8″ |
PCD 2440
| Frequency Range: | 2402…2480 MHz | |
| Polarisation: | linear | |
| Pattern Type: | omnidirectional | |
| Permissible Power: | 50 W | |
| Connector: | Type SMA female | |
| Impedance: | 50 Ohms nominal | |
| Length: | 80 mm | |
| Width: | 80 mm | |
| Hight: | 85 mm | |
| Weight: | 310 g | |
| Mounting: | 22 mm diameter tube, L = 30 mm
3/8″ |
WAND 0918
| Frequency Range: | 800 MHz – 2 GHz | |
| Polarisation: | linear | |
| Pattern Type: | omnidirectional | |
| Max Power: | 20 W | |
| Connector: | SMA | |
| Impedance: | 50 Ohm nominell | |
| Length: | 260 mm | |
| Diameter: | 20 mm | |
| Weight: | 145 g |
RS 9244
The radiation source RS 9244 complies to CISPR 25 Edition 4, which proposes the “Long Wire Antenna” and is used as reference source to evaluate the suitability of absorber lined shielded enclosures (ALSE) according to the ‘Long Wire Antenna method’.
VAMP 9243
| Frequency Range: | 9 kHz – 30 MHz | |
| Polarisation: | linear | |
| Pattern Type: | omnidirektional | |
| Connector: | BNC | |
| Impedance: | 50 Ohm nominell | |
| Dimensions Amplifier: | ||
| Length: | 180 mm | |
| Width: | 80 mm | |
| Hight: | 40 mm | |
| Length Rod: | 1 m | |
| Weight: | 900 g | |
| Mounting: | 1/4″, 3/8″ | |
VPMP 9241
| Frequency Range: | DC – 300 MHz | |
| Polarisation: | linear | |
| Pattern Type: | omnidirectional | |
| Permissible Power: | 2 kW | |
| Connector: | 2 x N | |
| Impedance: | 50 Ohm nominell | |
| Dimensions base plate: | 300 x 300 mm | |
| Housing dimensions: | 80 x 80 x 35 mm | |
| Length Rod: | 0.5 m | |
| Weight: | 0.9 kg |
Beehive-Electronics 100 Series EMC Probes
The EMC probe 100 series consists of three loop probes for magnetic fields and one stub probe for electric field.
Loop probes: 100A, 100B and 100C
Stub probes: 100D
