Schwarzbeck Monitoring & Drive Test Antennas

TETRA Dipole

Linear polarized half-wave dipole with 1:1 balun and fixed element length for fieldstrength measurements at TETRA (terrestrical trunked radio) networks.

 

Frequency range: 340 – 480 MHz

Gain: typ. 1.5 dBi

ILS Dipole

Linear polarized half-wave dipole with 1:1 balun and fixed element length for fieldstrength measurements at instrument landing systems (ILS).

Frequency range:

Localizer: 108 – 118 MHz (LOC, LLC)

Glideslope: 320 – 340 MHz (G/S)

Gain: 1.5 dBi

RSH 113

The RSH 113 is a crossed dipole antenna, consisting of two shortened half-wave-dipoles. The size reduction is achieved by the use of top loading discs. The design frequency range is from 108 to 118 MHz, typical applications are measurements at instrument landing systems (ILS-Localizer). The RSH 113 has a nearly omnidirectional pattern and comes with horizontal polarisation. The antenna can be used for both, Receive and Transmit Applications and comes with a nominal impedance of 50 Ω.

RSH 4786

Horizontal polarised omnidirectional Antenna for mobile and stationary receive and transmit applications.

 

A typical application is the DVB coverage measurement using measurement vehicles.

 

Frequency range: 350 – 1050 MHz

RSH 2342

Horizontal polarised omnidirectional Antenna for mobile and stationary receive and transmit applications.

 

A typical application is the DVB-T (DTMB,ATSC or ISDB-T) coverage measurement using measurement vehicles.

 

Frequency range: 170 – 350 MHz

RE 1790

Vertical polarized VHF- UHF biconical antenna

(170) 230 – 1000 (1100) MHz

with omni directional H-plane pattern

RE 4590

Vertical polarized VHF- UHF biconical antenna

(330) 450 – 1000 (1100) MHz

with omni directional H-plane pattern

RS 16

Vertical polarized microwave biconical antenna

(0,5) 1 – 6 (8,5) GHz

with omni directional H-plane pattern

RS 0460

Vertically polarised symmetrical biconical antenna

0,4 – 6 GHz

omnidirectional in the H-plane

RRAH 9286

The RRAH 9286 is an antenna holder for antennas with 22 mm tube for vertical mounting on a car roof rack. The antenna holder is suitable for all standard roof rack carriers with a max. cross-tube dimension of 44×30 mm. The mounting distance is adjustable from 82-92 cm at 2.5 cm intervals (center- center).