Transient Immunity

Danh mục: EMC Accessories

Các hệ thống để kiểm tra khả năng miễn nhiễm của các cụm điện tử và điện chống lại quá độ xảy ra trong xe, được tiến hành trên cả pin và đường tín hiệu / dữ liệu như được định nghĩa trong ISO 7637-2 và ISO 7637-3, ISO 16750-2, ECE Reg. 10 và nhiều thông số kỹ thuật OEM.


Catalogue

RCB 200N1

Transient Immunity

    Vui lòng để lại thông tin liên hệ

    Transient Immunity

    Giới thiệu :

    Trình tạo EM Test RCB 200N1 đáp ứng các yêu cầu được đặt ra bởi tài liệu tiêu chuẩn Ford FMC1278 và EMC-CS-2009.1. Nó được xây dựng bằng các thành phần được nêu trong Hình F-1 để tạo ra các xung như CI 220 A1, A2-1, A2-2, CI 2 và C-2, CI 260 F và RI 130 A2-1 và A2-2 mà RCB 200N1 được xây dựng thành một vỏ kim loại. Đối với RI 130 Kiểm tra RCB 200N1 cung cấp các đầu ra đồng trục loại BNC để kết nối thiết bị kiểm tra thử nghiệm được chỉ định cần thiết cho bài kiểm tra cụ thể này.

    Tùy chọn model :

    RCB 200N1

    • Approved by Ford acc. to FMC 1278 and EMC-CS-2009.1 requirements
    • Pulses CI 220: A1, A2-1, A2-2, C-1 and C-2
    • Pulse CI 260: F
    • Pulses RI 130: A2-1, A2-2 using a coupling test fixture
    • Fixed repetition times and pseudo-random timing
    • Automatic control of mode and switch settings by micro-controller
    • Easy control by manual operation
    • EOL status control of the relay as per FORD requirement

    NSG 5071

    • Designed in accordance to Ford standard FMC 1278
    • Transients disturbances CI 220 A and C pulses
    • CI 260 waveform F
    • User replaceable relays

    JT 5550

    • Plug-in modules for JASO D001-94
    • For many classic Japanese immunity tests
    • Cost-effective addition to the NSG 5500 automotive transient generator

    JT 5510

    • Plug-in modules for JASO D001-94
    • For many classic Japanese immunity tests
    • Cost-effective addition to the NSG 5500 automotive transient generator

    NT 5510

    • Plug-in modules for “classic” Nissan transients
    • Compliant with 28400 NDS07 (1998) and 28400 NDS03 (1997)
    • Cost-effective plug-in solution to expand test capabilities

    MT 5511

    • Numerous pulse widths, impendances, rise times included for all international standards and most manufacturer standards
    • Optional Ri jack for extended Ri options
    • BNC connector for new coupling methods

    LD 5550

    • Load Dump Pulses from 30 to 1500 ms pulse widths in 1 ms steps
    • Capable of suppressed pulses without affecting the pulse width
    • ISO 16750-2 verification annex compliant

    FLX 5510

    • Build your own pulse networks
    • Easy solution for special projects
    • Plug in a DIY 5510 submodule with your design for your needs
    • Supports a writeable and erasable surface for marking your project

    NSG 5500

    • Clean, compliant pulses on the single output
    • Built-in 100 A coupler/battery switch
    • All common international and vehicle manufacturer standard transients achieved in one compact solution
    • Available as 7 HU (three modules) or 14 HU (six modules)
    • Includes Pulse 3a/3b generator

    UCS 200N Series

    • Built-in EFT/Burst generator module
    • Built-in Micropulse generator module (ISO 7637, JASO, SAE and many more)
    • Built-in coupling network 80V, up to 200A
    • Built-in battery switch
    • Overcurrent protection
    • USB and GPIB-Bus
    • Emergency stop
    • Software for Windows

    LD 200N series

    • Load Dump generator according to ISO 7637, ISO 16750-2, SAE J1113, SAE J1455, JASO, Nissan and most car manufacturer requirements
    • Generates Clipped Load Dump pulses
    • Built-in 0.5 – 38 Ohm source impedance, selectable in 0.1 Ohm steps
    • Pulse duration up to 1200ms
    • Built-in coupler 80V/30A,
    • extendable to 100A
    • Front panel operation
    • Freestyle mode
    • USB and GPIB interfaces

    Vì sao nên chọn mua sản phẩm tại Công Ty TNHH VIAMVINA.

    Với trên 30 năm kinh nghiệm về điện và điện tử, chúng tôi luôn cung cấp giải pháp và sản phẩm tối ưu nhất cho khách hàng.

    Với đội ngũ kĩ thuật có hơn 30 năm kinh nghiệm làm việc tại Hàn Quốc, chúng tôi sẵn sàng hỗ trợ khách hàng về tất cả các vấn đề phát sinh trong quá trình sử dụng sản phẩm như bảo hành, sửa chữa, thay thế…

    Nếu cân tư vấn thêm các bạn vui lòng liên hệ với chúng tôi :

    CÔNG TY TNHH CÔNG NGHỆ VIAM VINA

    Địa chỉ trụ sở :Tầng1,Số 10 Đường Hoàng Ngân, Phường Ninh Xá, Tp.Bắc Ninh, tỉnh Bắc Ninh

    Hotline:  0969 095 867 hoặc 0979880176

    Email : sales@viamvina.com.vn

    SẢN PHẨM CÙNG LOẠI

    phone
    phone