Máy hàn cáp quang INNO A3


Model A3
Alignment Method Clad Alignment (4 Motors)
Number of Fiber Single
Applicable Fibers SM (ITU-T G.652&G.657) / MM (ITU-T G.651) / DS (ITU-T G 653) / NZDS (ITU-T G.655)
Cladding Diameter 80 ~ 150μm
Clevaed Length Diametere: 0.125mm ~ 1mm (coating) / Cleave Length 5 ~ 16mm
Typical Splice Loss SM: 0.03dB / MM: 0.01dB / DS: 0.05dB / NZDS: 0.05dB / G.657: 0.03dB
(Measured by fusion splicing compensating cutback according to ITU-T standard)
Return Loss >> 60dB
Estimated Splice Loss Available
Splice Time Quick mode 7s
Splice Mode Preset 6 kinds of splicing mode, Max 320 mode available
Heating Sleeve 20 ~ 60mm
Heating Time 15s (45mm, slim 60mm), 20s (60mm)
Heating Mode Max 32modes
Pull Test 1.96 ~ 2.25N
Dimension 197W x 137D x 87H mm (including rubber bumper) / 187W x 128D x 82H mm (excluding rubber bumper)
Weight 1.206kg (with battery) / 0.997kg (without battery)
White LED 2 White LEDs
Monitor 4.3″ Color LCD display, Full touch screen
Fiber View X, Y, X/Y
Magnification 120 ~ 240x
Results Storage 10,000 Splice data / 10,000 Splice image
Power Supply AC Input 100 ~ 240V, DC Input 9 ~ 14V
Terminal USB Type C
Battery Capacity 3000mAh Battery Capacity, Typical 150 cycles (Splice+Heat), Power save mode 200 cycles (Splice+Heat)
Electrode Life 5500 arcs discharges


Catalogue

Máy hàn cáp quang INNO A3

[contact-form-7 id="237" title="Yêu cầu báo giá"]

A3 ,
CLAD ALIGNMENT
ARC FUSION SPLICER

·New Friendly GUI Design
·SOC Support
·4.3” Color LCD Touch Screen
·Portable Charger Support

SẢN PHẨM CÙNG LOẠI

phone
phone