300 Watt Power Amplifier: DC – 300 KHz for Mil-Std-461 Com-Power ARI-300K

I Introducing Com-Power ARI-300K:

DC power amplifier to 300 kHz 300 Watts

The Com-Power ARI-300K power amplifier is specifically designed for conducted and radiated sensitivity tests as described in MIL-STD-461 (CS101 & RS101) and RTCA DO-160 (Section 18 ), in addition to other standards.
The ARI-300K operates from DC to 300 kHz. Its output power exceeds 300 Watts at 1 ohm or 2 ohm loads; 150 Watts into 4 ohms; and 75 Watts into 8 ohms (refer to chart below for minimum output specifications).
The amplifier is equipped with a protection circuit to prevent damage in case of input overload, incorrect output connection (short or incorrect load), excessive temperature as well as overcurrent conditions.
The front digital display shows the internal temperature of the amplifier as well as the bias current. There is also an LED light to indicate overheating and overcurrent errors.

II Technical specifications of Com-Power ARI-300K:

Frequency Range: DC to 300 kHz
Up to 300 Watts Output Power into 1 or 2 ohms with less than 0.3% distortion
Protection Circuitry from Input Overload, Over-Temperature & Over-Current
Three-Year Warranty