Audio and Low Frequencies Preamplifier Com-Power PAL-010

I Introducing Preamplifier Com-Power PAL-010:

Com-Power model PAL-010 preamplifier for EMC compliance testing. It has a frequency range of 100 Hz to 30 MHz. It has a gain of 28 dB. Therefore, It amplifies signals that were previously hidden below the EMI receiver’s noise level to become visible and measurable. The PAL-010 has a gain of ±2.5 dB over the entire frequency range to reduce measurement errors. It can be powered by a rechargeable NimH battery when an external power source is not available.

II Technical specifications of Com-Power PAL-010:

Frequency: 100 Hz – 30 MHz
Application: EMI / EMC Measurements
Gain: 28 dB
Gain Flatness: ± 2.5 dB
Noise Figure: < 1.9 dB<>
Impedance I/O: 50 Ohms
Connector Type: BNC (f)
Power: 15 VDC, 500 mA
Battery Pack: 2 x 6 V NimH Battery packs
Size: (L x W x H) 7.5″ x 5″ x 3″ (9 x13 x 7.6 cm)
Weight: 3.3 lbs. (1.5kg)