CDN for RJ-45 Shielded Com-Power CDN-T8SE

I Introducing CDN-T8SE:

The CDN-T8SE is used to conduct emissions or immunity testing on devices with shielded (or screened) transmission lines with up to four balanced pairs. It is used when the signal/telecommunications ports for the EUT and AE ports of the CDN-T8SE are equipped with protected RJ45 sockets. The RF input/output port is located at the top of the network and is equipped with a female BNC type connector. The outer surface of the network.

II Technical specifications of CDN-T8SE:

Product Name: Coupling Decoupling Network (CDN)

Compliant Test Standards: IEC / EN 61000-4-6
Application: Four screened, balanced pairs
Frequency Range: 150 kHz to 230 MHz
RF Input Voltage: 40 V (Max)
RF Input Connector: 50 Ω BNC (Female)
Voltage Rating: 124 V AC / 125 V DC (Line to Ground)
Current Rating: 1.5 Amp (Max)
AE and EUT Connections: 50 Ohm Female BNC
Common Mode Impedance:
150 kHz – 26 MHz: 150Ω ± 20Ω
26 MHz – 80 MHz: 150Ω + 60Ω / – 45Ω
80MHz – 230MHz: 150Ω + 60Ω / – 60Ω
Voltage Division Factor: 9.5 dB +1.5/ -0.5
Decoupling of Common Mode Disturbance:
150 KHz ≥ 45dB (RF/AE)
500 KHz ≥ 50dB (RF/AE)
230 MHz ≥ 50dB (RF/AE)
Dimensions: 8.5 x 4.5 x 3.5 inches or 21.5 x 11.4 x 8.8 cm
Weight: 2 lbs. or 0.9 kg
Accessories Available from Com-Power for setting test levels and running the test:
ADA-T8SE shorting adapters
ADA-515-2 150 Ω to 50 Ω adapters
TEP-050 50 Ω Terminator
ATTN-6-100W Power Attenuator
DCU-300-100W Directional Coupler
ASC series Power Amplifier