Com-Power CFT-10U 10 uF Feed Through Capacitor for MIL-STD and DO-160

I Introducing Com-Power CFT-10U:

The ruggedly constructed pass-through capacitors are highly reliable devices for general use in projection rooms and other environments. It has four threaded inserts for easy installation on a metal case. Its M6 threaded power stud will allow 100 Amps of current without heat or voltage loss. They have a low heat dissipation coefficient, high temperature rating, high insulation resistance, double the rated dielectric strength and long life. A discharge resistor is included in the capacitors, to discharge the capacitor when the applied voltage is removed.

II Technical specifications of Com-Power CFT-10U:

Capacitance: 10 µF ±10%
Current: 100 Amp at 40 degrees C
Voltage: 275 VAC RMS (60 Hz),  250 VAC RMS (400Hz),  600 VDC
Temperature: -55°C to +70°C @ rated voltage +105°C @ 50% of rated voltage
Dissipation factor: Less than 1% at 25°C (measured at 120 Hz)
Dielectric strength: Twice the rated VDC @ 25°C for two minutes
Bleeder Insulation resistance: 1.5 MΩ + 5 % @ 25°C rated voltage.
Insulation Resistance: 100MΩ prior to adding bleeder resistance
Construction: Brass, Nickel Plated