Com-Power CGO-501 EMI Source for CISPR and FCC

I Introducing Com-Power CGO-501 EMI:

EMI Source for CISPR and FCC Com-Power model CGO-501 Comb Generator is a broadband EMC signal source for rapid EMC site testing. It emits signals up to 1000 MHz with a step size of 1 MHz. EMC laboratories calibrate radiated emissions testing sites, instruments, and accessories at least once a year. Calibration procedures are complex and time consuming. However, calibration does not prevent equipment malfunctions mid-calibration such as broken receivers, broken cables, poor connections, bad antennas, etc. Regular monitoring of several frequencies on the Comb Generator’s broadband tuned output can verify the entire setup quickly and effectively. Any potential problem in the test setup can be detected before it causes erroneous results. It is powered by a rechargeable NimH battery pack. It has a circular shape for more uniform radiation output.

II Com-Power CGO-501 EMI technical specifications:

Quick, Pre-Test Site Validations
Wide Frequency Range  1 MHz to 1.5 GHz
Battery Operated – Extended Battery Life  operates >18 hours per charge
Automatic Low-Battery Voltage Shut-off
Stable RF Output
Three-Year Warranty

Intended Application: Radiated Reference Signal Source (for OATS, SAC, FAC, etc.)
Frequency Range: 1 MHz to 1.5 GHz
Frequency Step Size: 1 MHz
Frequency Stability: 20 ppm
Amplitude Stability: ± 0.1 dB
Time Stability: <1 dB over 12 months
Charging Adapter Output: 6 VDC (unregulated), 500 mA
Battery Type: 6V NiMH, 1 Ah
Battery Operation: >18 Hours Typical (fully-charged battery)
External LED Indicators: Battery Low, Power On
Antenna Type: (2) Monopoles (5-inch & 12-inch)
Generator Dimensions: 7 in. x 1.2 in. (17.8cm x 3cm)
Weight: 1.5 lbs (0.7 kg)