Com-Power CGO-515 Comb Generator Reference with 1 MHz or 5 MHz Step size

I Introducing Com-Power CGO-515:

The Com-Power CGO-515 Comb Generator is a broadband EMC signal source for rapid EMC site testing. It emits signals up to 1500 MHz in user-selectable 1 or 5 MHz frequency steps. EMC laboratories calibrate radiated emissions testing sites, instruments, and accessories at least once a year. Calibration procedures are complex and time consuming. However, calibration does not prevent equipment malfunctions mid-calibration such as broken receivers, broken cables, poor connections, bad antennas, etc. Regular monitoring of several frequencies on the Comb Generator’s broadband radiated output can verify the entire setup quickly and effectively. Any potential problem in the test setup can be detected before it causes erroneous results. It is powered by a rechargeable NimH battery pack. It has a circular shape for more uniform radiation output. It is supplied with a detachable antenna, battery charger and custom wooden storage box.

II Technical specifications of Com-Power CGO-515:

Quick, Pre-Test Site Validations
Wide Frequency Range  1 MHz to 1.5 GHz
Battery Operated – Extended Battery Life  operates >18 hours per charge
Automatic    Low-Battery    Voltage    Shut-off
User-selectable Output Frequency/Step Size
Three-Year Warranty

Intended Application: Radiated Reference Signal Source (for OATS, SAC, FAC, etc.)
Frequency Range: 1 MHz to 1.5 GHz
Frequency Step Size: 1 MHz or 5 MHz (user-selectable)
Frequency Stability: 20 ppm Amplitude Stability ± 0.1 dB
Time Stability: <1 dB over 12 months
Charging Adapter Output: 6 VDC (unregulated), 500 mA
Battery Type: 6V NiMH, 1 Ah
Battery Operation: >18 Hours Typical (fully-charged battery)
External LED Indicators: Battery Low, Power On
Antenna Type: (2) Monopoles (5-inch & 12-inch)
Generator Dimensions: 7 in. x 1.2 in. (17.8cm x 3cm)
Weight: 1.5 lbs (0.7 kg)