Com-Power CLCE-1032 Current monitoring / Sensing probes for CISPR MIL-STD 461 & DO-160

I Introducing Com-Power CLCE-1032:

The CLCE-1032 RF current probe is part of Com-Power’s extensive line of radio frequency conducted emission/immunity testers and calibration accessories.

CLCE-1032 is suitable for complaint measurements as required by CISPR 22, CISPR 32, DO-160, Mil Std 461, etc., as well as for monitoring applied current in conducted immunity tests.

Its design incorporates a ferrite core in a sturdy, circular hinged housing; thus allowing the probe to be opened on one side for easy placement of the wire, cable(s) or cable bundle(s) to be tested into the probe window, making the use of the CLCE-1032 much more convenient than other types other. split core probe.

The CLCE-1032 is designed for use in conjunction with a spectrum analyzer or EMI receiver or any 50Ω impedance measuring device to measure magnitude quantities against true rms voltage.

II Technical specifications of CLCE-1032:

Frequency Range: 9 kHz to 1000 MHz
Window (Aperture) Inside Diameter: 1.26″ (32 mm)
Outside Diameter: 2.83″ (72 mm)
Height: 0.76″ (19.3 mm)
Weight: 0.275 lbs. (0.125 kg)
Connector: Type-N (Female)
Transfer impedance (ZtΩ): 1Ω
Transfer impedance (dBΩ): -40 to 2 dBΩ (typical)*
Max Primary Current (DC-60 Hz): 150 Amps
Max Primary Current (400 Hz): 135 Amps
Max Primary Current (RF): 2 Amps
Max. Core Temperature: 248 °F (120 °C)
Pulse (8/20 µs):  500 Amps
Related Accessories Available from Com-Power:
FCLCE-1032 Calibration Fixture