Com-Power ISN / CDN-C50E Coupling Decoupling Network for 50 ohm Cable

I Introducing Com-Power ISN/CDN-C50E:

Designed for testing conductive immunity products according to IEC/EN 61000-4-6 and CISPR 16-1-2 using 50 Ohm coaxial cable for data transmission. CDN-C50E is one of the Coupling/Decoupling Network lines. It has a 50 Ohm BNC connector for both EUT and AE power connections. The CDN-C50E can handle current up to 1 Amp. The RF noise signal coupling port is female BNC. It can handle RF input voltage up to 40V. The underside of the CDN is unpainted for easy and effective grounding. This is a pre-packaged solution that includes the ACS series power amplifier and all accessories needed for testing. Com-Power CDN is individually calibrated. All Com-Power CDNs can be purchased separately or as part of an immunity testing system conducted under the CIS series.

II Com-Power ISN/CDN-C50E technical specifications:

Product Name: Coupling Decoupling Network (CDN)
Compliant Test Standards: IEC / EN 61000-4-6
Application: 50 Ohm Coaxial Cables
Frequency Range: 150 kHz to 230 MHz
RF Input Voltage: 40 V (Max)
RF Input Connector: 50 Ω BNC (Female)
Voltage Rating: 310 V AC / 440 V DC (Line to Ground)
Current Rating: 1 Amp (Max)
AE and EUT Connections: 50 Ohm Female BNC
Common Mode Impedance:
150 kHz – 26 MHz: 150Ω ± 20Ω
26 MHz – 80 MHz: 150Ω + 60Ω / – 45Ω
80MHz – 230MHz: 150Ω + 60Ω / – 60Ω
Voltage Division Factor: 9.5 dB +3 / -1
Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)
Dimensions: 6 x 6 x 13 inches or 15.2 x 15.2 x 33 cm
Weight: 5 lbs. or 2.3 kg
Accessories Available from Com-Power for setting test levels and running the test:
ADA-C50/C75 shorting adapters
ADA-515-2 150 Ω to 50 Ω adapters
TEP-050 50 Ω Terminator
ATTN-6-100W Power Attenuator
DCU-300-100W Directional Coupler
ASC series Power Amplifiers