CDN for USB Connectors Com-Power CDN-USB-AE

I Introducing CDN-USB-AE:

Products that use a USB Type A connector can use CDN-USB-AE for testing. It has USB Type A on the EUT side and USB Type B on the AE side. Com-Power CDN-USB-AE can handle current up to 1 Amp. The RF noise signal coupling port is female BNC. It can handle up to 40V of RF input voltage-Power supply CDN-USB-AE is a member of the Coupling/Decoupling Network series designed for testing products for conducted immunity according to IEC/EN 61000 -4-6 and CISPR 16-1- 2. The bottom surface of the CDN is unpainted for easy and effective grounding during EMC testing. Com-Power CDN-USB-AE is individually calibrated. All Com-Power CDNs can be purchased separately or as part of an immunity testing system conducted under the CIS series.

II Specifications of CDN-USB-AE:

Product Name: Coupling Decoupling Network (CDN)
Compliant Test Standards: IEC / EN 61000-4-6
Application: USB cable with type A connector
Frequency Range: 150 kHz to 230 MHz
RF Input Voltage: 40 V (Max)
RF Input Connector: 50 Ω BNC (Female)
Voltage Rating: 30 V AC / 30 V DC (Line to Ground)
Current Rating: 1 Amp (Max)
AE and EUT Connections: EUT: Type A, AE: Type B
Common Mode Impedance:
150 kHz – 26 MHz: 150Ω ± 20Ω
26 MHz – 80 MHz: 150Ω + 60Ω / – 45Ω
80MHz – 230MHz: 150Ω + 60Ω / – 60Ω
Voltage Division Factor: 9.5 dB +2 / -1
Decoupling of Common Mode Disturbance: ≥ 50dB (EUT/AE)
Dimensions: 8.5 x 4.5 x 3.5 inches or 21.5 x 11.4 x 8.8 cm
Weight: 2 lbs. or 0.9 kg
Accessories Available from Com-Power for setting test levels and running the test:
ADA-USB-AE shorting adapters
ADA-515-2 150 Ω to 50 Ω adapters
TEP-050 50 Ω Terminator
ATTN-6-100W Power Attenuator
DCU-300-100W Directional Coupler
ASC series Power Amplifiers