CDN for USB Type B Com-Power CDN-USB-BE

I Introducing CDN-USB-BE:

Used for devices that have a USB Type B cable for communication. It has USB type B on the EUT side and USB type A on the AE side and it can handle current up to 1 Amp. The RF noise coupling port is female BNC and can handle RF input voltage up to 40V. It is designed only for testing the conductive immunity of products according to IEC/EN 61000-4-6. The CDN-USB-BE is designed for testing products with uncoated CDN bottom surfaces for easy and effective grounding. Com-Power CDN-USB-BE fully complies with the requirements in IEC 61000-4-6 and CISPR 16-1-2. CDN Com-Power can be purchased separately or as part of a CIS series conducted immunity testing system, the pre-packaged solution includes the ACS series power amplifier and all necessary accessories. set for testing. Com-Power CDN-USB-BE is individually calibrated.

II Technical information CDN-USB-BE:

Product Name: Coupling Decoupling Network (CDN)
Compliant Test Standards: IEC / EN 61000-4-6
Application: USB cable with type B connector
Frequency Range: 150 kHz to 230 MHz
RF Input Voltage: 40 V (Max)
RF Input Connector: 50 Ω BNC (Female)
Voltage Rating: 30 V AC / 30 V DC (Line to Ground)
Current Rating: 1 Amp (Max)
AE and EUT Connections: EUT: Type B, AE: Type A
Common Mode Impedance:
150 kHz – 26 MHz: 150Ω ± 20Ω
26 MHz – 80 MHz: 150Ω + 60Ω / – 45Ω
80MHz – 230MHz: 150Ω + 60Ω / – 60Ω
Voltage Division Factor: 9.5 dB +2 / -1
Decoupling of Common Mode Disturbance: ≥ 50dB (EUT/AE)
Dimensions: 8.5 x 4.5 x 3.5 inches or 21.5 x 11.4 x 8.8 cm
Weight: 2 lbs. or 0.9 kg
Accessories Available from Com-Power for setting test levels and running the test:
ADA-USB-BE shorting adapters
ADA-515-2 150 Ω to 50 Ω adapters
TEP-050 50 Ω Terminator
ATTN-6-100W Power Attenuator
DCU-300-100W Directional Coupler
ASC series Power Amplifiers