Conducted Reference Comb Generator Com-Power CGC-255E

I Introducing Com-Power CGC-255E:

The CGC-255E Comb Generator is a broadband EMC reference signal source for conducting rapid EMC testing. It is used to test the entire test setup being conducted including the LISN, cables, transient limiters and receivers quickly and efficiently. Regularly monitoring a few frequencies or the entire frequency range using Comb Generator can detect potential problems before they cause erroneous results. This Comb Generator can be plugged directly into the EUT power port of LISN. The comb generator is powered by a rechargeable NimH battery pack to avoid any external interference.

II Technical specifications of Com-Power CGC-255E:

Intended Application Reference Signal Source for LISN verification

Frequency Range 50 kHz to 115 MHz

Frequency Step Size 50 kHz or 250 kHz

Frequency Stability 50 ppm

Amplitude Stability ± 0.1 dB

Time Stability <1 dB over 12 months

Charger Output / Input 6 VDC (unregulated), 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz

Battery Type 6V NiMH, 1 Ah

Operating Time >18 Hours Typical With Fully Charged Battery

External Indicators Battery Low and Power On

LISN Interface Plug NEMA 15-P type Dimensions 5 x 2.2 x 2.2 inches / 13.2 x 5.9 x 5.9 cm

Weight 1 lbs / 0.45 kg