Com-Power LI-125C LISN 25 Amps For CISPR 16 & ANSI C63.4

I Introducing Com-Power LI-125C:

The LI-125C LISN Line Impedance Stabilization Network provides the measurement platform necessary to perform emissions compliance testing conducted on power lines as required by most worldwide standards for commercial products. The LI-125C complies with both CISPR 16-1-2 and ANSI C63.4. LISN provides stable, defined impedance and isolates the EUT from power influences, thereby providing accurate and repeatable results. The LI-125C consists of a pair of single, separately placed conductor networks, installed in series with each current-carrying conductor in a single-phase, two-phase or DC electrical system. The second pair of LI-125Cs can be used to supply a 3-phase power system (Wye or Delta configuration). The LI-125C is equipped with Superior Electric SUPERCON® shielded receptacles at the power supply (power input) and EUT (power output) ports. Includes appropriate color-coded plugs for connection to the power source and EUT cord. This LISN uses an air core inductor to prevent saturation and permeability variations. The mounting plate of the LI-125C is unpainted to facilitate connection to ground during installation, which is essential due to the high leakage current.

II Technical specifications of LI-125C:

Specification: CISPR 16-1-2 / ANSI C63.4
Application: Power Line conducted emission tests
Frequency Range: 150KHz – 30 MHz
RF Connector: 50 Ohms N-type (female)
Current Rating: 25 Ampere AC, 17 Ampere DC
Voltage Rating: 270 VAC (Line to Ground), 380 VDC
Inductors: 50 microhenry (air-core)
Mains & EUT Connections: Superior Electric SUPERCON shrouded sockets
Dimensions (each network): 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm
Weight (each network): 6 lbs. / 2.7 kg
Insertion Loss: <0.5 dB (150 kHz – 30 MHz)
Isolation: > 40 dB (150 kHz – 30 MHz)