Com-Power LI-3100 LISN (100 Amps) for DO-160, MIL-STD 461 & CISPR 25/16

I Introducing Com-Power LI-3100:

DO-160, MIL-STD 461, CISPR 25 and CISPR 16

Model Line Impedance Stabilization Network (LISN): LI-3100 can handle current up to 100 Amps AC (70 Amps DC) and provides the measurement platform necessary to perform emissions compliance testing present on power lines as required by DO-160 & MIL-STD 461F and CISPR 25 and CISPR 16 from 10 kHz to 400 MHz.

The concept and advantages of LISN are:
a) connect in series and apply a specified impedance to the lines under test; thus providing a distinct advantage over current or voltage probe measurements, where line impedance is largely uncontrolled;
b) provide a coaxial RF measurement port for connection to measuring equipment into which the disturbance voltages present at the EUT port are coupled for measurement; And,
c) isolate the AE port (auxiliary equipment) from the EUT and RF ports, where:
1) minimize the influence of the AE connected device/cable on the impedance (and voltage division coefficient) of the network; And,
2) reduce the amplitude of any ambient signals as well as spurious noise voltages generated by the AE connection device, thereby minimizing their potential impact on the measurement results.

Two pairs of LI-3100s can be used to supply a 3-phase power system (Wye or Delta configuration).

II Technical specifications of Com-Power LI-3000

Product Name: Line Impedance Stabilization Network (LISN)
Specification: RTCA DO-160 / MIL-STD 461F / CISPR 25 / CISPR 16
Application: Power Line conducted emission tests
Frequency Range: 10KHz – 400 MHz
RF Connector: 50 Ohms N-type (female)
Current Rating: 100 Amperes AC, 70 Amperes DC
Voltage Rating: 480 VAC (Line to Ground), 676 VDC
Inductors: 5 microhenry (air-core)
Mains & EUT Connections: Superior Electric SUPERCON Shrouded sockets
Dimensions (each network): 10 x 10 x 21 inches / 25.4 x 25.4 x 53.3 cm
Weight (each network): 13 lbs / 5.9 kg
Insertion Loss: <0.5 dB (100 kHz to 108 MHz)